ChevyParts
My Garage
My Account
Cart
OEM 2001 Buick Century Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Alternators found
Product Specifications- Other Name: Generator Assembly, (Remanufacture); Generator, Engine Electrical
- Replaces: 10464448, 10464416, 19152074
- Item Weight: 12.50 Pounds
- Item Dimensions: 9.2 x 7.8 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244791
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Generator Assembly, (Remanufacture); Generator, Engine Electrical
- Replaces: 10464412, 10464425, 10464449, 19152066, 19152075
- Item Weight: 12.20 Pounds
- Item Dimensions: 9.4 x 8.1 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244792
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2001 Buick Century Alternator
With a comprehensive array of OEM 2001 Buick Century Alternator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Century Alternator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 Buick Century Parts Questions & Experts Answers
- Q: How to replace the Delphi CS 130D alternator on 2001 Buick Century?A: To take out the delphi cs 130d generator, first, pull battery negative link, demount the engine compartment cross vehicle brace and the Drive Belt from the generator. Set the coolant recovery reservoir to avoid, and then remove the bolts from generator 1,2,3, and break off the electrical connector. Move the protective boot out of the way from the terminal of the generator output bat, take the generator output bat nut off, disconnect the battery (positive) lead from the generator, then remove the generator itself. For installation, place the generator to the engine, install the battery (positive) lead and the generator output bat terminal nut, tighten it to 20 n.m (15 lb ft). Press the protective boot on the generator output bat terminal inst la the electrical connector, the insert out the generator bolt and generator bolt, finger starting them without tightening. Then, install the generator pivot bolt and start it using a finger too. Perform the work according to the mandatory torque sequence: first, tighten the generator pivot bolt to 50 n.m (37 lb ft), then tighten generator bolt to 50 n.m (37 lb ft), then finally tighten generator bolt to 50 n.m (37 lb ft). Once you have secured the generator, reinstall the coolant recovery reservoir, the Drive Belt, and the engine compartment cross brace and replace the battery negative cable.
