OEM 2001 Buick Park Avenue Cruise Control Module

2001 Buick Park Avenue Parts Questions & Experts Answers

• Q: How to replace the cruise control module on 2001 Buick Park Avenue?

  A: First, remove the fuel injector site shield to replace the Cruise Control Module. Next, push the lock release and free the cruise control cable from the engine bracket and Throttle Body. Refrain from the cruise control cable and the corresponding connection from the module assembly connector, and then disconnect the electrical connector from the module assembly. Then remove the retaining nuts and the module from the mounting studs and the removal of the Cruise Control Module bracket bolts from the module bracket and the module . Install by attaching the Cruise Control Module via the bracket and fasten the bracket bolt to 7.5 n.m(66 lb in). Next, mount the Cruise Control Module onto the studs of the cowl then apply the 2 nuts by rotating the bracket retaining nuts until we reach 9 n.m (80 Ib in). Connect the cable to the module, don't twist the ribbon when connecting the cable to the module. Mount the cruise control cable to module assembly connector then connect the cruise control cable housing connector with engine bracket and Throttle Body. Last but not least, fix the cruise control cable.