OEM 2000 Buick Park Avenue Cruise Control Module

2000 Buick Park Avenue Parts Questions & Experts Answers

• Q: How to remove and install the cruise control module on 2000 Buick Park Avenue?

  A: To take out the Cruise Control Module, firstly, you should take off the fuel injector site shield. Afterward, pull the lock release, remove the cruise control cable from the engine bracket and the Throttle Body. Remove cruise control cable and connector from the module assembly connector, then remove electrical connector from the module assembly. Take the retaining nuts and module out from the mounting studs; remove Cruise Control Module bracket bolts from the module bracket and module . For installation, connect the Cruise Control Module to the bracket and make sure to refer to the fastener notice in service precautions. Secure the module to bracket bolts, with the torque of 7.5 n.m (66 lb in). Position the Cruise Control Module on to the studs on the cowl and attach two nuts by tightening bracket retaining nuts on to 9 n.m (80 lb in). Locate the electrical connector and attach it to the module while being sure to not twist the ribbon when plugging in the cable. Mount the cruise control cable to the module assembly connector to and then attach the cruise control cable housing connector to the engine bracket and Throttle Body (1, 2). Lastly, make corrections to the cruise control cable.