How to replace the Idle Control Valve on 2001 Buick Park Avenue?

It requires turning off the Idle Control Valve by cutting off the electrical connector and removing the fuel injector sight shield. Remember to remove the valve and O-ring and the attaching screws. Check the O-ring and change where necessary. Install new O-ring, tighten the valve, re-connect the electric connector and reset the PCM. Switch on the engine and replace the sight shield.

OEM 2001 Buick Park Avenue Idle Control Valve

IACV

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Idle Control Valve found

View related parts
2001 Buick Park Avenue Idle Air Control Valve Part Number: 19333189
$64.76 MSRP: $115.13
You Save: $50.37 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Idle Air Control; Fuel Injection Idle Air Control Valve; Idle Speed Control; Valve Assembly; Valve, Throttle Body/Carburetor
- Replaces: 17112929
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19333189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2001 Buick Park Avenue Idle Control Valve

With a comprehensive array of OEM 2001 Buick Park Avenue Idle Control Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Park Avenue Idle Control Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Park Avenue Idle Control Valve Parts and Q&A

Q: How to replace the Idle Control Valve on 2001 Buick Park Avenue?
A: It requires turning off the Idle Control Valve by cutting off the electrical connector and removing the fuel injector sight shield. Remember to remove the valve and O-ring and the attaching screws. Check the O-ring and change where necessary. Install new O-ring, tighten the valve, re-connect the electric connector and reset the PCM. Switch on the engine and replace the sight shield.