How to replace the Wiper Switch on 2001 Cadillac Catera?

You must disable the sir system before replacing the windshield wiper and washer switch in this vehicle. The top steering column features requires cap removal and screw extraction prior to unscrewing the upper Steering Column Cover. First take off the steering wheel tilt lever along with its rubber protective cover from the lock cylinder. Unscrew and take out both the lower Steering Column Cover. You can remove the windshield washer switch from the steering column by pressing on its tabs while disconnecting the electrical connector at the same time. Plug the electrical cable into the Turn Signal Switch and position the switch on the steering column by letting the tabs fit in place. Put back the lower Steering Column Cover and fasten the screws before fitting the rubber protective cover to the ignition lock and steering wheel tilt lever. Reinstall the upper Steering Column Cover by placing screws and screw caps then switch on the sir system.

OEM 2001 Cadillac Catera Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Switches found

View related parts
2001 Cadillac Catera Wiper Switch
Part Number: 90494654
$23.30 MSRP: $158.20
You Save: $134.90 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Windshield Wiper & Windshield Washer; Windshield Washer Switch; Switch, Windshield Wiper Control
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.4 x 2.0 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90494654
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2001 Cadillac Catera Turn Signal Switch
Part Number: 9181013
Product Specifications
- Other Name: Switch Assembly, Turn Signal; Multi Purpose Switch; Signal Switch; Anchor Arm; Switch, Turn Signal Lamp
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.1 x 3.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9181013
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2001 Cadillac Catera Level Sensor
Part Number: 90346055
Product Specifications
- Other Name: Switch, Windshield Washer; Washer Fluid Level Sensor; Sensor, Windshield Washer
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 5.5 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90346055
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS

2001 Cadillac Catera Wiper Switch

With a comprehensive array of OEM 2001 Cadillac Catera Wiper Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac Catera Wiper Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Cadillac Catera Parts Questions & Experts Answers

Q: How to replace the Wiper Switch on 2001 Cadillac Catera?
A: You must disable the sir system before replacing the windshield wiper and washer switch in this vehicle. The top steering column features requires cap removal and screw extraction prior to unscrewing the upper Steering Column Cover. First take off the steering wheel tilt lever along with its rubber protective cover from the lock cylinder. Unscrew and take out both the lower Steering Column Cover. You can remove the windshield washer switch from the steering column by pressing on its tabs while disconnecting the electrical connector at the same time. Plug the electrical cable into the Turn Signal Switch and position the switch on the steering column by letting the tabs fit in place. Put back the lower Steering Column Cover and fasten the screws before fitting the rubber protective cover to the ignition lock and steering wheel tilt lever. Reinstall the upper Steering Column Cover by placing screws and screw caps then switch on the sir system.