Make sure this part fits

GM 9181013
Turn Signal Switch

1997-2001 Cadillac Catera

Customer Questions & Expert Answers (7)
GM 9181013 Turn Signal Switch
  • Part Description
    Switch Assembly, Turn Signal; Multi Purpose Switch
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2001 Cadillac CateraBase, Sport6 Cyl 3.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 9181013 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 9181013 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Turn Signal Switch on Cadillac Catera? Posted by Customer
    A:
    Before working on the Turn Signal Switch you need to deactivate the sir system. Unscrew the screw caps and remove the screws from the upper steering column before taking off its cover. Lift the steering wheel tilt lever and rubber sealing from the lock cylinder for access. Take out all screws and then take off the lower steering column top. Press the tabs to let the Turn Signal Switch slide out of the steering column and detach its electrical plug. Plug the electrical wire into the Turn Signal Switch and insert the assembly onto the steering column when you see the locking clamps mesh into place. Place the lower Steering Column Cover and tighten its screws after setting the rubber cover on the lock cylinder and the tilt lever for the steering wheel. Put back upper steering column parts and use screws to connect them. Afterward replace the screw caps to enable the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after the upper steering column cover for the 2000 Cadillac Catera? Posted by Customer
    A:
    The steering wheel tilt lever and the rubber protective cover from the lock cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Switch
    Q:
    What should be done after removing the rubber protective cover for the 2000 Cadillac Catera? Posted by Customer
    A:
    Remove the screws and the lower steering column cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    What is the first step to replace the Turn Signal/Headlamp Switch for the 2000 Cadillac Catera? Posted by Customer
    A:
    First disable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    Q:
    What should be removed from the upper steering column for the 2001 Cadillac Catera? Posted by Customer
    A:
    Remove the screw caps and screws from the upper steering column, then take off the upper steering column cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Switch
    Q:
    How do you ensure the switch is properly installed for the 2001 Cadillac Catera? Posted by Customer
    A:
    Press on the sides of the switch until it is fully seated in the dash.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Turn Signal Switch 9181013 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 9181013 Turn Signal Switch is available in the market under the name GM Headlight Switch, Turn Signal Switch, Wiper Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 9181013 Turn Signal Switch fits certain Cadillac Catera models.
The original GM component designated by manufacturer part number 9181013 maintains top performance when functioning as the Switch Assembly, Turn Signal; Multi Purpose Switch unit. The component 9181013 is constructed from durable material and its dimensions span 10.1 x 3.9 x 3.0 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Signal Switch; Anchor Arm; Switch, Turn Signal Lamp. The part 9181013 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.