Other Name: Switch Assembly-Turn Signal & Headlamp Dimmer; Multi Purpose Switch; Combination Switch; Signal Switch; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
Replaces: 10362761, 15258881, 15841544, 15915857
Fits the following Chevrolet Models:
Cobalt | 2005-2010 | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
Equinox | 2007-2009 | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
HHR | 2006-2011 | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
Q: How to replace the Headlight Switch on Chevrolet Colorado?
A: The replacement of headlamp switches begins with extracting the knee bolster trim panel. Initially remove the i/p-sustaining screw for the switch then carefully extract part of the switch from the i/p before disconnecting its electrical connector to remove the switch from the vehicle. During installation you should position the switch in front of the instrument panel then connect its electrical connector. Follow the fastener caution guidelines to install the switch on the instrument panel (I/P) before securing it with the screw at 2.5 nm (22 lb in). Reinstall the knee bolster trim panel as the last installation step.
Q: How to replace the Headlight Switch on Chevrolet Impala?
A: The replacement of the headlamp switch starts with removing the instrument panel cluster trim plate bezel then continuing to the screws from the headlamp switch housing. Following this step disconnect the foglamp switch along with the headlamp switch from the instrument panel by removing the headlamp switch housing. A flat-bladed tool must be utilized to extract the foglamp switch from its housing with the headlamp switch. Press the foglamp switch into place within the headlamp switch housing until it reaches complete seating position. Join the electrical cables that will link the headlamp switch and foglamp switch. Attach the headlamp housing switch back to the instrument panel while securing it with screws which should be tightened to 2 N.m (18 lb in). You should reinstall the instrument panel cluster trim plate bezel as the last step.
Q: How to Change the Headlight Switch? What Are the Steps on Chevrolet SSR?
A: The first step to replace the headlamp switch includes removing the left knee bolster trim followed by detaching the electrical connector before unscrewing the switch-fastening screws. The installation procedure includes first connecting the electrical connector and then fastening the screws to attach the switch to the trim panel at 2 N.m (18 lb in) before reinstalling the left knee bolster trim.