Q: How to replace the driver or passenger seat back Seat Heater Pad on Chevrolet Colorado?
A: The first step to replace either the driver or passenger seat back cushion heater begins with removing the seat from the vehicle. You should remove the seat back cover to reach the heater element before disconnecting the electrical harness from the heater element. Separate the heater element from the pad and feed the heater element electrical harness into the hole built into the pad. Install the heater element electrical harness by pushing it through the hole of the pad before securing the adhesive-backed heater element against the pad surface. Reattach the electrical harness to the heater element after which you must reinstall the seat back cover and place the seat back back into the vehicle.
Q: How to replace the rear Seat Heater Pad on Chevrolet Tahoe?
A: The procedure to replace the rear seat cushion heater requires first removal of the seat cushion trim cover. First detach the seat cushion heater from its pad before unconnecting the seat cushion heater wiring harness. First connect the cushion heater wire harness then mount the seat cushion heater followed by installing the seat cushion trim cover.
Q: How to replace the front seat back Seat Heater Pad on Chevrolet SSR?
A: The first step to replace front seat back heater element requires removing the seat from the vehicle. Beginning with the seat back release handle and seat belt guide removal you should proceed to remove the chrome head restraint trim from the headrest component. Start by removing the retaining tabs located at both seat back panel sides and also at its bottom. Next move to the left and right seat back cushion side bolster panels. Start by removing the cover tabs which surround both sides and the top of the seat back panel and the inside edge of the head restraint support before removing the seat back panel. To begin dismantle the seat back assembly by first removing its cover and cushion then unfastening the hog ring binding between cover and foam cushion before eliminating the cover from the cushion. Extract the heater element from the pad and feed the heater element electrical cables through the pad opening. Begin by passing the heater element electrical harness through the pad hole before applying the adhesive heater element onto the pad surface. Reinstall the cover onto the cushion by mounting hog rings and return the combined items to their position on the seat back assembly. To install the seat back cover tabs you should attach them first to the inside of the head restraint support then complete the attachment to the seat back panel. The installation concludes with first inserting the side cushion bolster panels before mounting the seat back cover retaining tabs which span both edges and the base of the seat back panel last attaching the tabs running across the upper seat back panel. Before installing the seat back inside the vehicle, connect the seat belt guide and seat back release handle and chrome head restraint trim to their respective positions on the headrest.