OEM 2001 Chevrolet Cavalier Throttle Cable

2001 Chevrolet Cavalier Parts Questions & Experts Answers

• Q: How to replace the throttle cable on 2001 Chevrolet Cavalier?

  A: A replacement of this throttle cable requires beginning with the left sound insulator (Insulator Replacement - IP in Instrument Panel, Gauges, and Console) removal followed by throttle cable disconnection from the pedal assembly. Depress the bulkhead cable tangs before pushing the cable toward the engine bay and removing the retaining clip to detach it from the push-clip. First remove cruise control cables when present then push the cable tangs outward while pressing the cable through its bracket. Remove the cable from the throttle cam. Position the new cable via the cable bracket before pushing upward to allow cable retainer tangs to expand properly. Reinstall the cruise control cable followed by insertion of the cable into the push-in clip and finally install the cable retaining clip and tighten it to 10 N.m (89 lb in). Direct the cable through the bulkhead and insert the throttle cable through the slot of the throttle pedal assembly before setting it into position. The linkages that incorporate flexible parts should have their route cleared at least 50 mm (2.0 in) away from throttle linkage movement unless installed with active protection. Check the throttle pedal for proper opening and closing operations while verifying wide open throttle throttle valve utilization after inspecting for longevity issues of all components plus proper carpet fit under the pedal. Reinstall the left sound insulator after these checks.