OEM 2001 Chevrolet Cavalier Transmission Pan

2001 Chevrolet Cavalier Transmission Pan Parts Questions & Experts Answers

• Q: How to replace the Transmission Pan on the Automatic Transaxle-4T40-E/4T45-E on 2001 Chevrolet Cavalier?

  A: Vehicle elevation and supporting procedure must be performed first to achieve Oil Pan replacement on automatic transaxle-4t40-e/4t45-e. Place a drain pan directly under the base of the transaxle Oil Pan. The operator should handle Oil Pan bolts with care because damage to sealing surfaces can produce oil leaks. Keep the front and side bolts detached from the Oil Pan and relax the rear bolts by turning them four times. Use a rubber mallet to gently strike the Oil Pan before draining fluid while using it to remove all remaining bolts and the Oil Pan and old gasket. Before installation of the Oil Pan, check it for damage and dryness while inspecting it for any dents. The first step is to replace the Oil Pan gasket if the sealing ribs show damage and then install the Oil Pan while using a new bottom pan replacement if necessary. You must tighten the bolts holding the Oil Pan at 14 nm (124 inch lbs.) torque value before lowering your vehicle and inspecting fluid levels through the pan and leak testing both the fluid and gasket areas of the pan.