OEM 2001 Chevrolet Corvette Fuel Injector

2001 Chevrolet Corvette Fuel Injector Parts Questions & Experts Answers

• Q: How to replace a fuel injector on 2001 Chevrolet Corvette?

  A: The replacement of fuel injectors begins by disconnecting the negative Battery Cable. Use the fuel pressure gauge (J 34730-1A) device to remove system pressure before eliminating the Fuel Rail assembly while paying attention to prevent damage for both Fuel Injector electrical connections and spray nozzles. Release the retainer clip by spreading it to extract the injector which you should remove together with its o-ring seals from each end of the injector. Select the right Fuel Injector by checking the assembly contains the correct part number and production stampings displaying its manufacturing date together with week code and production plant number. New injector o-ring seals require cleanup engine oil for lubrication before installation onto the Fuel Injector while using a fresh retainer clip. Insert the Fuel Injector into its injector socket through the Fuel Rail while positioning it with the electrical connector exposed and reinstall the Fuel Rail component. First clean up the negative cable then reinstall it followed by checking the area for fuel leaks after powering the vehicle with ignition on for 2 seconds and then off for 10 seconds before ending with another 2 seconds of on time. Complete programming of transmitters and carry out any needed idle learn steps conclude the procedure. A fuel line quick connect separator tool set (J 37088-A) possibly needs to be used when conducting this process.