How to Replace the Front Rack and Pinion Steering Gear on 2001 Chevrolet Lumina?

Raise and support vehicle. Remove wheel; disconnect intermediate shaft; set steering straight and LOCK; remove tie rods; support rear frame and lower; disconnect power steering lines; remove rack through left wheel opening. Install new rack; reconnect lines; raise frame; reinstall bolts; refill and bleed power steering; check leaks; align.

OEM 2001 Chevrolet Lumina Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack And Pinion found

View related parts
2001 Chevrolet Lumina Steering Gear Part Number: 26055468
$334.89 MSRP: $655.68
You Save: $320.79 (49%)
ADD TO CART
Product Specifications
- Other Name: Gear Kit, Steering; Gear Assembly
- Item Weight: 22.00 Pounds
- Item Dimensions: 8.3 x 6.3 x 53.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26055468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Lumina Submodels:
- Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2001 Chevrolet Lumina Rack And Pinion

With a comprehensive array of OEM 2001 Chevrolet Lumina Rack And Pinion, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Lumina Rack And Pinion are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Lumina Rack And Pinion Parts and Q&A

Q: How to Replace the Front Rack and Pinion Steering Gear on 2001 Chevrolet Lumina?
A: Raise and support vehicle. Remove wheel; disconnect intermediate shaft; set steering straight and LOCK; remove tie rods; support rear frame and lower; disconnect power steering lines; remove rack through left wheel opening. Install new rack; reconnect lines; raise frame; reinstall bolts; refill and bleed power steering; check leaks; align.