How to replace the blower motor resistor on 2001 Chevrolet Prizm?

Before you can replace the blower motor resistor , you have to remove the instrument panel compartment. Then, take off the electrical connector from the blower motor resistor. Then, take out the 2 screws that are keeping the blower motor resistor attached to the blower case. With installation, put the blower motor resistor into the blower case, then secure it using the 2 screws. Afterward, connect the electrical connector to the blower motor resistor and put the instrument panel compartment back in place.

OEM 2001 Chevrolet Prizm Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2001 Chevrolet Prizm Resistor
Part Number: 89018516
$27.33 MSRP: $51.00
You Save: $23.67 (47%)
ADD TO CART
Product Specifications
- Other Name: Resistor, Blower Motor; Blower Motor Resistor; Resistor, A/C Evaporator Blower
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.7 x 6.4 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89018516
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS

2001 Chevrolet Prizm Blower Motor Resistor

With a comprehensive array of OEM 2001 Chevrolet Prizm Blower Motor Resistor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Prizm Blower Motor Resistor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Prizm Parts Questions & Experts Answers

Q: How to replace the blower motor resistor on 2001 Chevrolet Prizm?
A: Before you can replace the blower motor resistor , you have to remove the instrument panel compartment. Then, take off the electrical connector from the blower motor resistor. Then, take out the 2 screws that are keeping the blower motor resistor attached to the blower case. With installation, put the blower motor resistor into the blower case, then secure it using the 2 screws. Afterward, connect the electrical connector to the blower motor resistor and put the instrument panel compartment back in place.