How to replace the harmonic balancer on 2001 Chevrolet Suburban 1500?

Gather tools: Balancer Remover J 41816, End Protector J 41816-2, Flywheel Holding Tool J 42386-A, Balancer/Sprocket Installer J 41665, Torque Angle Meter J 36660-A. Remove belt, shroud, starter; install holding tool. Remove balancer bolt and balancer, clean. Reinstall balancer with installer, reuse then replace bolt to spec. Remove holding tool, reinstall parts, perform position learn.

OEM 2001 Chevrolet Suburban 1500 Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Harmonic Balancer found

View related parts
2001 Chevrolet Suburban 1500 Vibration Damper Part Number: 12634105
Product Specifications
- Other Name: Pulley; Harmonic Balancer; Crankshaft Balance; Balancer
- Replaces: 12576652, 12553112
- Item Weight: 10.90 Pounds
- Item Dimensions: 9.3 x 8.6 x 6.5 inches
- Condition: New
- SKU: 12634105
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2001 Chevrolet Suburban 1500 Harmonic Balancer

With a comprehensive array of OEM 2001 Chevrolet Suburban 1500 Harmonic Balancer, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Suburban 1500 Harmonic Balancer are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Suburban 1500 Harmonic Balancer Parts and Q&A

Q: How to replace the harmonic balancer on 2001 Chevrolet Suburban 1500?
A: Gather tools: Balancer Remover J 41816, End Protector J 41816-2, Flywheel Holding Tool J 42386-A, Balancer/Sprocket Installer J 41665, Torque Angle Meter J 36660-A. Remove belt, shroud, starter; install holding tool. Remove balancer bolt and balancer, clean. Reinstall balancer with installer, reuse then replace bolt to spec. Remove holding tool, reinstall parts, perform position learn.