OEM 2001 Chevrolet Tracker Clutch Slave Cylinder

2001 Chevrolet Tracker Parts Questions & Experts Answers

• Q: How to replace the Clutch Slave Cylinder on 2001 Chevrolet Tracker?

  A: To change clutch actuator cylinder first lift and support adequately the vehicle, drain hydraulics. Seize the bolt and washer from the clutch fluid hose, then clutch actuator cylinder bolts from the clutch actuator cylinder. Second, remove the clutch actuator cylinder from the transmission. Before installing the new clutch actuator cylinder, apply a little drop of grease to its tip using the lubricant gm p/n 1051344 or its substitute. Mount on the transmission together with the clutch actuator cylinder, making sure comply with the fastener notice in service precautions. Tighten the clutch actuator cylinder with their bolts to 16 nm (11.5 ft. Lbs.),709. Connect the actuator cylinder fordil line to the actuator correction color and attach the clutch responder cylinder hose bolt by tightening the line holding to 23 nm (17 ft. Lbs.). Last but not least, bleed the hydraulic clutch system.