OEM 2002 Chevrolet Tracker Clutch Slave Cylinder

2002 Chevrolet Tracker Parts Questions & Experts Answers

• Q: How to replace the Clutch Slave Cylinder on 2002 Chevrolet Tracker?

  A: Vehicle lifting and supporting becomes necessary before draining the hydraulic system for clutch actuator cylinder replacement. Start by unbolting and removing the clutch fluid hose bolt along with its washer and then do the same with the clutch actuator cylinder bolts from the clutch actuator cylinder. First remove the clutch actuator cylinder from the transmission compartment. New clutch actuator cylinder installation requires a small amount of gm p/n 1051344 (Canadian P/N 993037) or equivalent lubricant applied to its tip for proper function. Secure the clutch actuator cylinder to the transmission by following the fastener notice in service precautions. Tighten the clutch actuator cylinder bolts to a torque of 16 nm (11.5 ft. Lbs.). Install the clutch actuator cylinder line fluid to the clutch actuator cylinder . The hose bolt installation requires 23 nm (17 ft. Lbs.) of torque while securing the fluid line bolts. Bleed the hydraulic clutch system as the last step.