How to replace the Coolant Temperature Sensor on 2001 Chevrolet Tracker?

Draining the cooling system should be the initial step before you replace the Engine Coolant Temperature (ECT) sensor. Launch Point 1 involves disconnecting the ECT sensor electrical connector before removing the ECT sensor. To install the ECT sensor users should tighten it to 15 N.m (11 lb ft). Finish the task by connecting the ECT sensor electrical connector then filling the cooling system.

OEM 2001 Chevrolet Tracker Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2001 Chevrolet Tracker Coolant Temperature Sensor
Part Number: 91172375
Product Specifications
- Other Name: Sensor, Coolant Temperature (Engine Unit); Temperature Sensor; Temperature Sending Unit
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91172375
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2001 Chevrolet Tracker Coolant Temperature Sensor

With a comprehensive array of OEM 2001 Chevrolet Tracker Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Tracker Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Tracker Parts Questions & Experts Answers

Q: How to replace the Coolant Temperature Sensor on 2001 Chevrolet Tracker?
A: Draining the cooling system should be the initial step before you replace the Engine Coolant Temperature (ECT) sensor. Launch Point 1 involves disconnecting the ECT sensor electrical connector before removing the ECT sensor. To install the ECT sensor users should tighten it to 15 N.m (11 lb ft). Finish the task by connecting the ECT sensor electrical connector then filling the cooling system.

Related 2001 Chevrolet Tracker Parts

Alternate Year Models

2000 Chevrolet Tracker Coolant Temperature Sensor 2002 Chevrolet Tracker Coolant Temperature Sensor