How to service the crankshaft main bearing crankshaft seal on 2001 Chevrolet Tracker?

The crankshaft main bearing seal service requires removal of both the engine Oil Pan and Flywheel from the engine system. The service procedure starts by removing five bolts securing the rear main oil seal housing before removing the housing and its gasket. Pull the rear main oil seal out of the housing. The new rear main seal should be placed into the rear main seal housing before adding chassis grease gm p/n 1051344 or equivalent for lubrication. We must attach the rear main seal housing to the cylinder block with a new gasket while using five retaining bolts (1, 2) that need tightening up to 12 nm (106 inch lbs.). The installation process requires removal of extra gasket material from the cylinder block mating surface once the rear main oil seal housing is properly in place. After completing the installation, replace the engine Oil Pan along with the Flywheel.

OEM 2001 Chevrolet Tracker Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2001 Chevrolet Tracker Rear Main Seal
Part Number: 91176515
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
- Replaces: 91174334
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.7 x 5.8 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91176515
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
2001 Chevrolet Tracker Front Crank Seal
Part Number: 91177421
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Seal; Crankshaft Pulley Seal; Crankshaft Seal
- Position: Front
- Replaces: 91174333
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.2 x 4.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2001 Chevrolet Tracker Crankshaft Seal

With a comprehensive array of OEM 2001 Chevrolet Tracker Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Tracker Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Tracker Parts Questions & Experts Answers

Q: How to service the crankshaft main bearing crankshaft seal on 2001 Chevrolet Tracker?
A: The crankshaft main bearing seal service requires removal of both the engine Oil Pan and Flywheel from the engine system. The service procedure starts by removing five bolts securing the rear main oil seal housing before removing the housing and its gasket. Pull the rear main oil seal out of the housing. The new rear main seal should be placed into the rear main seal housing before adding chassis grease gm p/n 1051344 or equivalent for lubrication. We must attach the rear main seal housing to the cylinder block with a new gasket while using five retaining bolts (1, 2) that need tightening up to 12 nm (106 inch lbs.). The installation process requires removal of extra gasket material from the cylinder block mating surface once the rear main oil seal housing is properly in place. After completing the installation, replace the engine Oil Pan along with the Flywheel.

Related 2001 Chevrolet Tracker Parts

Alternate Year Models

2000 Chevrolet Tracker Crankshaft Seal 2002 Chevrolet Tracker Crankshaft Seal