How to replace the rear crankshaft seal and housing on 2002 Chevrolet Tracker?

Before handling replacement of crankshaft rear oil seal with housing start by uninstalling the engine Oil Pan along with the Flywheel. Begin by extracting the five bolts securing the rear main oil seal housing before you detach the seal housing together with its gasket and finally remove the rear main oil seal from the housing. Before mounting the new rear main seal in the housing you need to apply chassis grease according to gm part number 1051344 (Canadian part number 993037) or its equivalent. Use five retaining bolts (1, 2) to install the rear main seal housing to the cylinder block while applying new gasket material; tighten bolts to 12 nm (106 inch lbs.). Following installation of the rear main oil seal housing remove extra gasket material from the cylinder block interface before reattaching the Flywheel and engine Oil Pan.

OEM 2002 Chevrolet Tracker Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2002 Chevrolet Tracker Rear Main Seal
Part Number: 91176515
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
- Replaces: 91174334
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.7 x 5.8 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91176515
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
2002 Chevrolet Tracker Front Crank Seal
Part Number: 91177421
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Seal; Crankshaft Pulley Seal; Crankshaft Seal
- Position: Front
- Replaces: 91174333
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.2 x 4.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2002 Chevrolet Tracker Crankshaft Seal

With a comprehensive array of OEM 2002 Chevrolet Tracker Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Tracker Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Tracker Parts Questions & Experts Answers

Q: How to replace the rear crankshaft seal and housing on 2002 Chevrolet Tracker?
A: Before handling replacement of crankshaft rear oil seal with housing start by uninstalling the engine Oil Pan along with the Flywheel. Begin by extracting the five bolts securing the rear main oil seal housing before you detach the seal housing together with its gasket and finally remove the rear main oil seal from the housing. Before mounting the new rear main seal in the housing you need to apply chassis grease according to gm part number 1051344 (Canadian part number 993037) or its equivalent. Use five retaining bolts (1, 2) to install the rear main seal housing to the cylinder block while applying new gasket material; tighten bolts to 12 nm (106 inch lbs.). Following installation of the rear main oil seal housing remove extra gasket material from the cylinder block interface before reattaching the Flywheel and engine Oil Pan.

Related 2002 Chevrolet Tracker Parts

Alternate Year Models

2001 Chevrolet Tracker Crankshaft Seal 2003 Chevrolet Tracker Crankshaft Seal