How to replace the Knock Sensor (KS) on 2001 Chevrolet Venture?

To replace the Knock Sensor (KS), be sure to turn OFF the ignition, and raise the vehicle. Remove the wiring harness connector from knock sensor and remove the sensor from the engine block. When installing the new knock sensor, do not apply thread sealant to the sensor threads because they have a factory coat, and an extra amount can interfere by altering the sensor's ability to detect detonation. Mount the knock sensor into the engine block and tighten it to 19 N.m (14 lb ft). Lastly, connect the wiring harness connector to the knock sensor as well as lowering the vehicle.

OEM 2001 Chevrolet Venture Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2001 Chevrolet Venture Knock Sensor
Part Number: 10456238
$19.36 MSRP: $60.45
You Save: $41.09 (68%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456238
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2001 Chevrolet Venture Knock Sensor

With a comprehensive array of OEM 2001 Chevrolet Venture Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Venture Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Venture Parts Questions & Experts Answers

Q: How to replace the Knock Sensor (KS) on 2001 Chevrolet Venture?
A: To replace the Knock Sensor (KS), be sure to turn OFF the ignition, and raise the vehicle. Remove the wiring harness connector from knock sensor and remove the sensor from the engine block. When installing the new knock sensor, do not apply thread sealant to the sensor threads because they have a factory coat, and an extra amount can interfere by altering the sensor's ability to detect detonation. Mount the knock sensor into the engine block and tighten it to 19 N.m (14 lb ft). Lastly, connect the wiring harness connector to the knock sensor as well as lowering the vehicle.

Related 2001 Chevrolet Venture Parts

Alternate Year Models

2000 Chevrolet Venture Knock Sensor 2002 Chevrolet Venture Knock Sensor