How to replace the Ignition Control Module on 2001 Chevrolet Venture?

I disconnect all the electrical connectors from the Ignition Control Module first. Pay attention to the location of Spark Plug Wires for installation and remove them from the ignition coils. Detach the screws that hold the coil assemblies to the Ignition Control Module and disconnect the coils from the module. Then, there is the removal of the Ignition Control Module from the bracket. For installation, position the Ignition Control Module onto the bracket and install the coils onto the module, according to the fastener notice mentioned in the service precautions. Hence fasten the coils with screws and tighten to 4.5 n.m (40 lb in). Finally, put back the Spark Plug Wires as you did when removing and reconnect the electrical connectors to the Ignition Control Module.

OEM 2001 Chevrolet Venture Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Control Module found

View related parts
2001 Chevrolet Venture Control Module
Part Number: 19245557
$221.80 MSRP: $455.78
You Save: $233.98 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; Coil Module; Module; Bracket, Distributor (Also Knock Sensor); Module, Distributor (Also Knock Sensor)
- Replaces: 10489422
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.8 x 4.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19245557
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2001 Chevrolet Venture Ignition Control Module

With a comprehensive array of OEM 2001 Chevrolet Venture Ignition Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Venture Ignition Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Venture Parts Questions & Experts Answers

Q: How to replace the Ignition Control Module on 2001 Chevrolet Venture?
A: I disconnect all the electrical connectors from the Ignition Control Module first. Pay attention to the location of Spark Plug Wires for installation and remove them from the ignition coils. Detach the screws that hold the coil assemblies to the Ignition Control Module and disconnect the coils from the module. Then, there is the removal of the Ignition Control Module from the bracket. For installation, position the Ignition Control Module onto the bracket and install the coils onto the module, according to the fastener notice mentioned in the service precautions. Hence fasten the coils with screws and tighten to 4.5 n.m (40 lb in). Finally, put back the Spark Plug Wires as you did when removing and reconnect the electrical connectors to the Ignition Control Module.