How to replace the antenna cable on 2001 GMC Savana 1500?

The antenna extension cable replacement process starts by removing both the radio unit together with its mounting bracket and the engine cover. Beginning at the right lower portion of the instrument panel workers must disconnect the antenna cable connector before removing the antenna cable from its retaining clips on the instrument panel carrier. Start the installation process by putting the antenna cable back into position through the vehicle then properly secure it to panel carrier retaining clips. Reconnect the antenna cable connector at the lower right of the instrument panel while reinstalling the engine cover and radio mounting bracket and radio.

OEM 2001 GMC Savana 1500 Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Antenna Cable found

View related parts
2001 GMC Savana 1500 Antenna Cable Part Number: 15960701
Product Specifications
- Other Name: Cable Assembly-Radio Antenna; Cable; Cable, Radio Antenna
- Item Weight: 1.30 Pounds
- Item Dimensions: 45.9 x 4.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15960701
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

2001 GMC Savana 1500 Antenna Cable

With a comprehensive array of OEM 2001 GMC Savana 1500 Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Savana 1500 Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 GMC Savana 1500 Antenna Cable Parts and Q&A

Q: How to replace the antenna cable on 2001 GMC Savana 1500?
A: The antenna extension cable replacement process starts by removing both the radio unit together with its mounting bracket and the engine cover. Beginning at the right lower portion of the instrument panel workers must disconnect the antenna cable connector before removing the antenna cable from its retaining clips on the instrument panel carrier. Start the installation process by putting the antenna cable back into position through the vehicle then properly secure it to panel carrier retaining clips. Reconnect the antenna cable connector at the lower right of the instrument panel while reinstalling the engine cover and radio mounting bracket and radio.