How to replace the EGR valve on 2001 GMC Savana 1500?

In order to install the EGR valve, unfasten the negative battery cable, and then take out the air cleaner assembly. Record the EGR valve location prior to its take-off. Unhook the harness, take out the valve and gasket, wash the surface and put a new gasket. Install the valve again, screw the bolts, reconnect the harness and assemble.

OEM 2001 GMC Savana 1500 EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 EGR Valve found

View related parts
2001 GMC Savana 1500 Throttle Position Sensor Part Number: 12576918
Product Specifications
- Other Name: Valve, Emission Control System; EGR Vacuum Solenoid; EGR Valve; Valve, Emission Control System(EGR Control)
- Replaces: 17113278, 17113575, 12568582, 17093020, 17096188, 17113619, 17113618, 17113303, 17113615, 17113405
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.4 x 4.9 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12576918
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

2001 GMC Savana 1500 EGR Valve

With a comprehensive array of OEM 2001 GMC Savana 1500 EGR Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Savana 1500 EGR Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 GMC Savana 1500 EGR Valve Parts and Q&A

Q: How to replace the EGR valve on 2001 GMC Savana 1500?
A: In order to install the EGR valve, unfasten the negative battery cable, and then take out the air cleaner assembly. Record the EGR valve location prior to its take-off. Unhook the harness, take out the valve and gasket, wash the surface and put a new gasket. Install the valve again, screw the bolts, reconnect the harness and assemble.