How to replace the Power Steering Hose Inlet on 2001 GMC Savana 2500?

Draining of power steering fluid into a pan beneath the vehicle should occur prior to replacing the power steering gear inlet hose. Take the power steering inlet hose from steering pump while removing steering gear inlet hose from steering gear prior to removing the hose from the vehicle. During installation route the hose in exactly the same position where it used to be before removal while maintaining a straight path between connection points to manipulate sharp bends and kinks. Place the steering gear inlet hose onto the steering gear before tightening its fitting to reach 27 nm (20 ft. Lbs.). Beginning the installation starts with fitting the power steering inlet hose to the steering pump port while tightening the hose fitting to 27 nm torque value (20 ft. Lbs.). Bleed the power steering system after installation when you check the power steering fluid level and remove the pan placed below the vehicle.

OEM 2001 GMC Savana 2500 Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Power Steering Hoses found

View related parts
2001 GMC Savana 2500 Power Steering Pressure Hose Part Number: 26040765
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure
- Item Weight: 1.20 Pounds
- Item Dimensions: 14.7 x 10.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26040765
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 2500 Submodels:
- Base, SLT | 6 Cyl 4.3 L GAS
View related parts
2001 GMC Savana 2500 Power Steering Pressure Hose Part Number: 26040766
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure
- Item Weight: 1.20 Pounds
- Item Dimensions: 13.4 x 11.7 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26040766
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 2500 Submodels:
- Base, SLE, SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS
View related parts
2001 GMC Savana 2500 Reservoir Hose Part Number: 26054534
Product Specifications
- Other Name: Hose, Fluid Reservoir; Power Steering Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.80 Pounds
- Item Dimensions: 24.7 x 5.1 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26054534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 2500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
2001 GMC Savana 2500 Power Steering Return Hose Part Number: 26063303
Product Specifications
- Other Name: Hose, Steering Gear Oil Return; Power Steering Hose; Return Hose
- Replaces: 15059944
- Item Weight: 1.30 Pounds
- Item Dimensions: 14.3 x 4.9 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26063303
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 2500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

2001 GMC Savana 2500 Power Steering Hose

With a comprehensive array of OEM 2001 GMC Savana 2500 Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Savana 2500 Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 GMC Savana 2500 Power Steering Hose Parts and Q&A

Q: How to replace the Power Steering Hose Inlet on 2001 GMC Savana 2500?
A: Draining of power steering fluid into a pan beneath the vehicle should occur prior to replacing the power steering gear inlet hose. Take the power steering inlet hose from steering pump while removing steering gear inlet hose from steering gear prior to removing the hose from the vehicle. During installation route the hose in exactly the same position where it used to be before removal while maintaining a straight path between connection points to manipulate sharp bends and kinks. Place the steering gear inlet hose onto the steering gear before tightening its fitting to reach 27 nm (20 ft. Lbs.). Beginning the installation starts with fitting the power steering inlet hose to the steering pump port while tightening the hose fitting to 27 nm torque value (20 ft. Lbs.). Bleed the power steering system after installation when you check the power steering fluid level and remove the pan placed below the vehicle.