Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 26040766
Power Steering Pressure Hose

1996-2002 GM

Customer Questions & Expert Answers (14)
GM 26040766 Power Steering Pressure Hose
  • Part Description
    Hose Assembly-Power Steering Gear Inlet; Power Steering Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2000 GMC Savana 2500 Power Steering Pressure Hose Diagram for 26040766
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 26040766

  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2002, 1996 Chevrolet Express 1500Base, LS, LT8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1999-2002, 1996 Chevrolet Express 2500Base, LS8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
    1999-2002, 1996 Chevrolet Express 3500Base, LS8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 8.1 L GAS
    1999, 1996 Chevrolet P30Base8 Cyl 5.7 L GAS
    1999-2002, 1996 GMC Savana 1500Base, SLE, SLT8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1999-2002, 1996 GMC Savana 2500Base, SLE, SLT8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS
    1999-2002, 1996 GMC Savana 3500Base, SLE, SLT8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26040766 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26040766 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Steering Hose Inlet on GMC Savana 1500? Posted by Customer
    A:
    Draining of power steering fluid into a pan beneath the vehicle should occur prior to replacing the power steering gear inlet hose. Take the power steering inlet hose from steering pump while removing steering gear inlet hose from steering gear prior to removing the hose from the vehicle. During installation route the hose in exactly the same position where it used to be before removal while maintaining a straight path between connection points to manipulate sharp bends and kinks. Place the steering gear inlet hose onto the steering gear before tightening its fitting to reach 27 nm (20 ft. Lbs.). Beginning the installation starts with fitting the power steering inlet hose to the steering pump port while tightening the hose fitting to 27 nm torque value (20 ft. Lbs.). Bleed the power steering system after installation when you check the power steering fluid level and remove the pan placed below the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Steering Hose on a 4.3L engine on GMC Savana 2500? Posted by Customer
    A:
    A 4.3L engine replacement of Power Steering Cooler Pipe Hose starts by preparing to collect draining fluid from the connections. The first step involves disconnecting (4,5) power steering hose connections and using caps to seal power steering hoses and cooler ends from dirt particles. The power steering pipe connections need to be disconnected followed by securing caps on power steering pipes and cooler ends. First disconnect the bolts and extract the cooler from its vehicle position. Set the cooler in its proper position on the vehicle and install the bolts while tightening them to 5 Nm (44 inch lbs.). The next procedure requires installation of power steering hose 4,5 connections before installing power steering pipe connections. The power steering system needs power steering fluid then a bleeding procedure should happen to confirm correct system operation.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the Power Steering Gear Inlet Hose for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Install a drain pan under the vehicle and siphon the power steering fluid from the reservoir to prevent excessive spillage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after preparing to catch the fluid for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Disconnect the power steering hose connections and cap the power steering hoses and cooler ends to prevent dirt entry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Reservoir Outlet Pipe/Hose for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Siphon the power steering fluid from the reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the final step in the process for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Fill the power steering system with power steering fluid and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed after siphoning the power steering fluid for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the power steering inlet hose from the steering pump and the steering gear inlet hose from the steering gear, then take the hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after installing the hoses for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Check the power steering fluid level, remove the drain pan from under the vehicle, and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after preparing to catch the fluid for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Disconnect the power steering hose connections and cap the ends of the hoses and cooler to prevent dirt entry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after installing the steering gear outlet hose for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Install the power steering outlet hose to the steering pump and check the power steering fluid level.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the final step after installation for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after preparing to catch the fluid for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Disconnect the power steering hose connections and cap the ends of the hoses and cooler to prevent dirt entry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Reservoir Inlet Pipe/Hose for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Install a drain pan under the vehicle and siphon the fluid from the reservoir to prevent excessive spillage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Pressure Hose 26040766 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26040766 Power Steering Pressure Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26040766 Power Steering Pressure Hose fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 26040766 maintains top performance when functioning as the Hose Assembly-Power Steering Gear Inlet; Power Steering Hose unit. The component 26040766 is constructed from durable material and its dimensions span 13.4 x 11.7 x 5.0 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Hose; Hose, Hydraulic Steering Gear Pressure. The part 26040766 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.