Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 26040765
Power Steering Pressure Hose

1996-2002 GM

Customer Questions & Expert Answers (11)
GM 26040765 Power Steering Pressure Hose
  • Part Description
    Hose Assembly-Power Steering Gear Inlet; Power Steering Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2000 GMC Savana 2500 Power Steering Pressure Hose Diagram for 26040765
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 26040765

  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2002, 1996 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS
    1999-2002, 1996 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS
    1999, 1996 Chevrolet P30Base6 Cyl 4.3 L GAS
    1999-2002, 1996 GMC Savana 1500Base, SLE, SLT6 Cyl 4.3 L GAS
    1999-2002, 1996 GMC Savana 2500Base, SLT6 Cyl 4.3 L GAS
    2000-2002 GMC Savana 3500Base, SLE, SLT6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26040765 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26040765 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Steering Hose on Chevrolet Express 2500? Posted by Customer
    A:
    Before hose replacement in the Power Steering repair you should prepare on collecting fluid from disconnected connections. First disconnect the power steering hose connections (4,5) by using appropriate caps to keep the power steering hoses and the cooler ends free from contamination. A person should next disconnect the power steering pipe connections followed by capping both power steering pipes and cooler ends. First remove the bolts before taking out the cooler from the vehicle. First align the cooler on the vehicle and insert and tighten bolts to 5 Nm (44 inch lbs.). After that sequence the connections between power steering hose (4,5) and power steering pipe connections. When concluding the installation fill the power steering system with the required fluid while also performing a bleeding procedure.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after siphoning the power steering fluid for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the power steering inlet hose from the steering pump and the steering gear inlet hose from the steering gear, then take the hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after checking the fluid level for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Remove the drain pan from under the vehicle and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for tightening the steering gear outlet hose for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Tighten the hose fitting to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Cooler Pipe/Hose for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Prepare to catch any fluid that drains from the connections.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed after siphoning the power steering fluid for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Remove the power steering outlet hose from the steering pump and the steering gear outlet hose from the steering gear, then take the hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you install the new cooler for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Position the cooler back onto the vehicle and install the bolts, tightening them to 5 Nm (44 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you install the new cooler for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Place the cooler back into the vehicle and install the nuts, tightening them to 28 Nm (21 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed after siphoning the fluid for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Remove the power steering outlet hose from the steering pump and the steering gear outlet hose from the steering gear, then take the hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after siphoning the fluid for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Remove the reservoir inlet hose from the brake booster and from the reservoir, then take the hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Pressure Hose 26040765 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26040765 Power Steering Pressure Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26040765 Power Steering Pressure Hose fits certain Chevrolet Express 1500, Express 2500, P30 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 26040765 maintains top performance when functioning as the Hose Assembly-Power Steering Gear Inlet; Power Steering Hose unit. The component 26040765 is constructed from durable material and its dimensions span 14.7 x 10.2 x 4.3 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Hose; Hose, Hydraulic Steering Gear Pressure. The part 26040765 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.