ChevyParts
My Garage
My Account
Cart
OEM 2002 Buick LeSabre Automatic Transmission Filter
AT Filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Automatic Transmission Filter found
2002 Buick LeSabre Filter Element
Part Number: 24227477$43.24 MSRP: $77.22You Save: $33.98 (44%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Filter Kit, Automatic Transmission Fluid; Transmission Filter; Hydraulic Filter; Auto Transmission Filter; Filter Kit, Oil Suction Tube; Oil Pan Pump Suction.
- Replaces: 24206433
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.6 x 7.7 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24227477
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2002 Buick LeSabre Automatic Transmission Filter
With a comprehensive array of OEM 2002 Buick LeSabre Automatic Transmission Filter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick LeSabre Automatic Transmission Filter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Buick LeSabre Parts Questions & Experts Answers
- Q: What Tools Are Required to Service and Repair the Automatic Transmission Filter on 2002 Buick LeSabre?A: The servicing process of automatic transmission fluid and filter needs slide hammer (J6125-1B), axle boot remover (J23129), and transmission assembly lubricant (J36850) as required tools. Place a drain pan at the bottom of the transaxle Oil Pan while you raise and support the vehicle. Uncap the Oil Pan bolts starting from the front then the sides while leaving the rear bolts at four turns' rotation. To drain the fluid you should lightly hit the Oil Pan with a rubber mallet or apply a prying force while inspecting the fluid color. The next step includes removing the rest of the Oil Pan bolts before separating the Oil Pan and its gasket. A long screwdriver will pry the Oil Filter out and you should examine the Oil Filter seal for any damage. To eliminate a damaged seal use the slide hammer (J6125-1B) with axle boot remover (J23129). Place a new filter inside the case after coating both the seal and a small amount of transmission assembly lubricant (J36850) or petroleum jelly. The Oil Pan Gasket remains usable unless damage occurs to its sealing area. Install the Oil Pan together with the gasket before tightening the bolts to 14 nm (125 inch lbs.). Lower the vehicle before you fill the transaxle to the correct level while checking for any fluid leaks from both the transmission fluid and Oil Pan Gasket.
