Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2002 Buick Regal Camshaft Position Sensor

Cam Position Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

  • 2002 Buick Regal Camshaft Position Sensor - 10456148
    2002 Buick Regal Camshaft Position Sensor Diagram - 10456148
    View related parts

    2002 Buick Regal Camshaft Position Sensor

    Part Number: 10456148
    Product Specifications
    • Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 2.3 x 2.3 x 2.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 10456148
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2002 Buick Regal Submodels:
    • 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2002 Buick Regal Camshaft Position Sensor

With a comprehensive array of OEM 2002 Buick Regal Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Regal Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Regal Parts Questions & Experts Answers

  • Q: How to service the camshaft position sensor on 2002 Buick Regal?
    A: The service procedure for the Camshaft Position Sensor starts with removing the coolant recovery reservoir followed by disconnecting the Drive Belt. The electrical connector for the Camshaft Position Sensor needs disconnection to perform the procedure. The sensor bolt removal will allow easy extraction of the component from the engine front cover. Secure the Camshaft Position Sensor by placing it onto the engine front cover and following the fastener notice in service precautions. Fasten the sensor into position by using the Camshaft Position Sensor bolt while torquing it to 10 n.m (89 lb in). After reconnecting the electrical connector to the Camshaft Position Sensor the installation requires Drive Belt and coolant recovery reservoir reinstallation.

Related 2002 Buick Regal Parts

Alternate Year Models

+
2001 Buick Regal Camshaft Position Sensor 2003 Buick Regal Camshaft Position Sensor