OEM 2002 Buick Regal Fuel Filler Hose

2002 Buick Regal Fuel Filler Hose Parts Questions & Experts Answers

• Q: How to replace the fuel filler hose on 2002 Buick Regal?

  A: First drain the Fuel Tank when replacing the Fuel Filler Hose through completion of two essential steps to begin the procedure. Start by removing the fuel filler pipe screws that sit inside the fuel filler pocket followed by raising and supporting the automobile. Start by removing the fuel filler pipe screw that is mounted on the underbody and detach the fuel filler pipe from the tank after loosening the hose clamp at the fuel filler pipe. Installation starts with attaching the fuel filler pipe to the underbody with an attaching screw before tightening it to 13 n.m (10 lb ft). Check that the filler hose rests completely on the Fuel Tank port and the fuel filler pipe then verify the clamp placement between tank and bead so tighten the Fuel Tank filler hose clamp to 2.5 n.m (22 lb in). Make sure to lower the vehicle then fasten the fuel filler pipe screws into the fuel filler pipe access panel while tightening them to 2.5 n.m (22 lb in). To finish the process you must add fuel followed by installing the fuel fill cap.