OEM 2002 Buick Rendezvous Starter

2002 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to service the PG260 F1 starter motor on 2002 Buick Rendezvous?

  A: Service of pg260 f1 Starter motor starts by disconnecting the negative terminal battery ground cable. Depending on the vehicle's height support the vehicle while using suitable equipment to remove the radiator air baffle assembly. Start by removing the bat terminal electrical leads and nut from the Starter motor followed by disconnecting s terminal electrical lead and its corresponding nut. The Starter motor requires removal after gathering the torque converter cover and unfastening the Starter motor bolts. Start by positioning the Starter motor then add Starter motor bolts before tightening them to a torque of 47 n.m (35 lb ft). Start by reattaching the torque converter cover followed by connecting the electrical leads to the Starter motor s terminal. Squeeze the nut tight with 3 n.m (27 lb in) torque. To complete the installation place the Starter motor bat terminal fasteners and tighten the solenoid bat terminal nut to a torque of 10 n.m (89 lb in). After completing these steps, reinstall the radiator air baffle assembly before lowering the vehicle and restoring the battery ground (negative) cable connection to the battery.