How to replace the MAP Sensor on 2002 Cadillac DeVille?

You should start by turning the ignition off then disconnect the MAP Sensor electrical connector. Start by removing the accelerator control cable bracket bolt and bracket before taking out the MAP Sensor from the Intake Manifold. Check the MAP Sensor grommet for signs of wear or damage before installing a new grommet. Install the MAP Sensor into the Intake Manifold by following the directives found in the fastener notice in service precautions. Start by fastening the accelerator control cable bracket with its bolts at 12 n.m (106 lb in). Finally, attach the MAP Sensor electrical connector.

OEM 2002 Cadillac DeVille MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2002 Cadillac DeVille M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2002 Cadillac DeVille Submodels:
- Base, Concours, d'Elegance, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

2002 Cadillac DeVille MAP Sensor

With a comprehensive array of OEM 2002 Cadillac DeVille MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Cadillac DeVille MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Cadillac DeVille Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2002 Cadillac DeVille?
A: You should start by turning the ignition off then disconnect the MAP Sensor electrical connector. Start by removing the accelerator control cable bracket bolt and bracket before taking out the MAP Sensor from the Intake Manifold. Check the MAP Sensor grommet for signs of wear or damage before installing a new grommet. Install the MAP Sensor into the Intake Manifold by following the directives found in the fastener notice in service precautions. Start by fastening the accelerator control cable bracket with its bolts at 12 n.m (106 lb in). Finally, attach the MAP Sensor electrical connector.