OEM 2002 Cadillac DeVille Throttle Position Sensor

2002 Cadillac DeVille Parts Questions & Experts Answers

• Q: How to service and repair the Throttle Position Sensor on 2002 Cadillac DeVille?

  A: Service and repair of the Throttle Position Sensor requires initial steps to remove the idle air control (IAC) electrical connector from the iac sensor and the manifold absolute pressure (MAP) sensor electrical connector from the MAP Sensor. You need to first remove the water pump belt cover before removing tp sensor retaining screws while disconnecting the tp sensor electrical connector and tp sensor electrical connector from the tp sensor . Attach an o-ring to your tp sensor before installing the tp sensor electrical connector to this sensor. Put the tp sensor on the Throttle Body before screwing it in place with 2.3 n.m (20 lb in) torque. Use electrical connectors to fasten the iac electrical connector to the iac sensor while also attaching the MAP Sensor electrical connector to the MAP Sensor. Rephrase the tp sensor learn procedure by activating the ignition to run/on mode for 60 seconds followed by a lock/off state for 15 seconds after belt installation.