ChevyParts
My Garage
My Account
Cart
OEM 2002 Chevrolet Camaro Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Alternators found
2002 Chevrolet Camaro Alternator Part Number: 19244783
$289.93 MSRP: $543.99You Save: $254.06 (47%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Generator, Engine Electrical
- Replaces: 10464402, 10464070, 10464407, 19152060
- Item Weight: 11.70 Pounds
- Item Dimensions: 9.2 x 7.8 x 7.6 inches
- Condition: New
- SKU: 19244783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2002 Chevrolet Camaro Alternator Part Number: 10464437
Product Specifications- Other Name: Generator Assembly, (Remanufacture); Generator, Engine Electrical
- Item Weight: 11.10 Pounds
- Item Dimensions: 7.0 x 7.8 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10464437
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2002 Chevrolet Camaro Alternator
With a comprehensive array of OEM 2002 Chevrolet Camaro Alternator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro Alternator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Chevrolet Camaro Alternator Parts Questions & Experts Answers
- Q: How to replace the alternator on 2002 Chevrolet Camaro?A: The generator replacement process begins with battery wire negation followed by accessory belt removal. Start by disconnecting the electrical generator connector then you can proceed with positive cable removal by moving the boot down cable length and removing the positive cable nut (at generator) before pulling the cable off the stud. Begin generator replacement by removing the bolts that secure the generator (2, 3, 6) followed by unattachment of the canister purge solenoid. A technician should start installation by placing the generator in position before using generator bolts (2, 3, 6) to secure it firmly. Then tighten generator bolts (2, 6) to 30 n.m (22 lb ft) while tightening generator bolt to 50 n.m (37 lb ft). First put the canister purge solenoid back into place then use a pair of pliers to put the positive cable on the generator stud and secure it with the positive cable nut (generator), tightening it to 22 n.m (16 lb ft) before dropping the boot over the generator stud. Plug the generator electrical connection into place before replacing the accessory Drive Belt and securing the negative Battery Cable.