How to remove and replace the Body Control Module (BCM) on 2002 Chevrolet Camaro?

The first step to dismantle and install a Body Control Module (BCM) is to disconnect the negative Battery Cable. Detach the ip insulator so you can pull the bcm free from its hvac duct position. Disconnect the electrical connectors that attach to the bcm and reduce the ip harness extension device from the bcm. Secure the ip harness extension to the bcm and join the harness electrical connectors to the bcm. Install the bcm into its position over the duct by pressing it until it seats completely. Replace the i/p insulator at its proper location and connect the Battery Cable while performing any required programming setup.

OEM 2002 Chevrolet Camaro Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Body Control Modules found

View related parts
2002 Chevrolet Camaro Control Module Part Number: 10407669
Product Specifications
- Other Name: Module, Headlamp/Fog Lamp/Turn Signal; Daytime Running Light Module; Sentinel Module; Module
- Replaces: 10261144
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.4 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10407669
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, RS, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Body Control Module Part Number: 9353681
Product Specifications
- Other Name: Module Assembly, Body Control; Module; Module, Body Multi Function Electric Computer; Module, Door Electric And Vacuum Locks
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 4.2 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9353681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, RS, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Body Control Module Part Number: 9353691
Product Specifications
- Other Name: Module Assembly, Body Control; Control Module; Module; Module, Body Multi Function Electric Computer; Module, Door Electric And Vacuum Locks
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.2 x 4.1 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9353691
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, RS, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Control Module Part Number: 12182126
Product Specifications
- Other Name: Module, Door Window; Express Module; Module
- Replaces: 12088537
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.3 x 4.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12182126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2002 Chevrolet Camaro Body Control Module

With a comprehensive array of OEM 2002 Chevrolet Camaro Body Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro Body Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Camaro Body Control Module Parts and Q&A

Q: How to remove and replace the Body Control Module (BCM) on 2002 Chevrolet Camaro?
A: The first step to dismantle and install a Body Control Module (BCM) is to disconnect the negative Battery Cable. Detach the ip insulator so you can pull the bcm free from its hvac duct position. Disconnect the electrical connectors that attach to the bcm and reduce the ip harness extension device from the bcm. Secure the ip harness extension to the bcm and join the harness electrical connectors to the bcm. Install the bcm into its position over the duct by pressing it until it seats completely. Replace the i/p insulator at its proper location and connect the Battery Cable while performing any required programming setup.