Make sure this part fits

GM 10407669
Control Module

1997-2002 GM

Customer Questions & Expert Answers (6)
GM 10407669 Control Module
GM 10407669 Control Module
  • Part Description
    Module, Headlamp/Fog Lamp/Turn Signal
  • Replaces
    10261144
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2002 Chevrolet CamaroBase, RS, Z28, Z28 SS6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
    1997-1998 Chevrolet CorvetteBase, Indianapolis 500 Pace Car8 Cyl 5.7 L GAS
    1997-2000 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2000 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1997-2002 Pontiac FirebirdBase, Formula, Trans Am6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
    1999-2000 Pontiac MontanaBase6 Cyl 3.4 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10407669 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10407669 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the Light Control Module on Chevrolet Camaro? Posted by Customer
    A:
    Service of the Lamp Control Module begins with unplugging electrical connectors from the headlamp door opening actuator control module followed by module removal from the forward lamp harness bracket. Installation requires sliding the headlamp opening door actuator control module onto the forward lamp harness bracket until it secures through the bracket. Reconnect all electrical connectors to the headlamp opening door actuator control module.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to remove and replace the Body Control Module (BCM) on Chevrolet Camaro? Posted by Customer
    A:
    The first step to dismantle and install a Body Control Module (BCM) is to disconnect the negative Battery Cable. Detach the ip insulator so you can pull the bcm free from its hvac duct position. Disconnect the electrical connectors that attach to the bcm and reduce the ip harness extension device from the bcm. Secure the ip harness extension to the bcm and join the harness electrical connectors to the bcm. Install the bcm into its position over the duct by pressing it until it seats completely. Replace the i/p insulator at its proper location and connect the Battery Cable while performing any required programming setup.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after connecting the IP harness extension for the 2001 Chevrolet Camaro? Posted by Customer
    A:
    Connect the harness electrical connectors to the BCM.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Body Control Module
    Q:
    Why is it unlikely that the BCM is the cause of the fault for the 2000 Chevrolet Camaro? Posted by Customer
    A:
    The BCM is very reliable, making it unlikely to be the cause of the fault.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Body Control Module
    Q:
    What should be done after securing the body control module for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the left side instrument panel insulator and reconnect the battery negative cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Body Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Control Module 10407669 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10407669 Control Module is available in the market under the name GM Body Control Module, Light Control Module. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10407669 Control Module fits certain Chevrolet Camaro, Corvette, Venture models, as well as Pontiac Firebird, Montana, Trans Sport. Additionally, it is compatible with Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10407669 maintains top performance when functioning as the Module, Headlamp/Fog Lamp/Turn Signal unit. The component 10407669 is constructed from durable material and its dimensions span 6.4 x 3.2 x 3.1 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Daytime Running Light Module; Sentinel Module; Module. The part 10407669 has available replacement options 10261144. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.