OEM 2002 Chevrolet Camaro Fuel Pressure Regulator

2002 Chevrolet Camaro Fuel Pressure Regulator Parts and Q&A

• Q: How to service and repair the fuel pressure regulator on 2002 Chevrolet Camaro?

  A: The first step for servicing or repairing the Fuel Pressure Regulator requires relief of fuel pressure. Examine and wipe out all dirt from the Fuel Pressure Regulator retaining ring after removing the Fuel Rail. First separate the snap ring from the housing before turning the Fuel Pressure Regulator with a shop towel underneath to remove it from its housing. Service the Fuel Pressure Regulator by first removing the small o-ring of the pressure regulator and the filter screen and two large o-rings as well as the back up o-ring. Apply a protective covering to the Fuel Pressure Regulator housing for the purpose of contamination prevention. The installation process requires avoiding compressed air tests or cleans on the Fuel Pressure Regulator and excludes solvent bath immersion. Place new o-rings on the Fuel Pressure Regulator before applying light clean engine oil to them. Install the storage o-ring first followed by the largest o-ring followed by the filter screen and finishing with the smallest o-ring. The Fuel Pressure Regulator should be placed inside its housing then secured through use of the snap ring. The operator must inspect for fuel leaks after installing the Fuel Rail by engaging the ignition for two seconds followed by two seconds of disengagement then re-engaging the ignition to check for fuel leaks.