How to replace the PCV Valve on 2002 Chevrolet Camaro?

You must begin the PCV valve replacement process by holding down the PCV valve cover and removing its cover bolts before removing the cover. Take out the PCV valve together with its spring and O-ring unit. Begin with installing the O-ring and spring onto a new valve before attaching the PCV valve cover by placing a new gasket (if needed) followed by securing it with cover bolts. The installation of the PCV valve cover ends with tightening its bolts to 12 Nm (106 inch lbs.).

OEM 2002 Chevrolet Camaro PCV Valve

Position Crank Ventilation Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 PCV Valve found

View related parts
2002 Chevrolet Camaro PCV Valve
Part Number: 25043843
Product Specifications
- Other Name: Valve, PCV; Crankcase Vent Valve; Crankcase; Valve, Engine Crankcase
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.1 x 1.4 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25043843
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Berlinetta, LT, RS, RS Heritage Edition, Sport | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS

2002 Chevrolet Camaro PCV Valve

With a comprehensive array of OEM 2002 Chevrolet Camaro PCV Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro PCV Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Camaro PCV Valve Parts Questions & Experts Answers

Q: How to replace the PCV Valve on 2002 Chevrolet Camaro?
A: You must begin the PCV valve replacement process by holding down the PCV valve cover and removing its cover bolts before removing the cover. Take out the PCV valve together with its spring and O-ring unit. Begin with installing the O-ring and spring onto a new valve before attaching the PCV valve cover by placing a new gasket (if needed) followed by securing it with cover bolts. The installation of the PCV valve cover ends with tightening its bolts to 12 Nm (106 inch lbs.).