How to replace the rear sway bar link on 2002 Chevrolet Camaro?

Begin by raising and proper support of the vehicle before starting to replace the rear sway bar link. Start the procedure by removing the sway bar link nut followed by the bolt and bushings and ending with the sway bar link spacer along with bushings. The underbody pan bracket can be removed only if the bracket bolts need removal. The bracket can then be pried off from its position under the underbody pan. The installation process and alignment of the sway bar link bracket should occur with the underbody pan before you install the bracket along with its bolts while tightening these bolts to 47 Nm (35 ft. lbs.). The installation of the sway bar link begins with spacing the bushings while adding the sway bar link bushings. Then add the bolt and nut and tighten the bolt to 23 Nm (17 ft. lbs.). Finally, lower the vehicle.

OEM 2002 Chevrolet Camaro Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2002 Chevrolet Camaro Stabilizer Link Part Number: 10221779
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.0 x 2.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10221779
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Stabilizer Link Part Number: 10164176
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Front
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.4 x 2.0 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10164176
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2002 Chevrolet Camaro Sway Bar Link

With a comprehensive array of OEM 2002 Chevrolet Camaro Sway Bar Link, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro Sway Bar Link are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Camaro Sway Bar Link Parts and Q&A

Q: How to replace the rear sway bar link on 2002 Chevrolet Camaro?
A: Begin by raising and proper support of the vehicle before starting to replace the rear sway bar link. Start the procedure by removing the sway bar link nut followed by the bolt and bushings and ending with the sway bar link spacer along with bushings. The underbody pan bracket can be removed only if the bracket bolts need removal. The bracket can then be pried off from its position under the underbody pan. The installation process and alignment of the sway bar link bracket should occur with the underbody pan before you install the bracket along with its bolts while tightening these bolts to 47 Nm (35 ft. lbs.). The installation of the sway bar link begins with spacing the bushings while adding the sway bar link bushings. Then add the bolt and nut and tighten the bolt to 23 Nm (17 ft. lbs.). Finally, lower the vehicle.