Other Name: Clutch Assembly-Fan Blade; Clutch; Clutch, Engine Air Cooling Fan
Item Weight: 5.20 Pounds
Item Dimensions: 8.7 x 8.4 x 4.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15152298
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 Chevrolet Express 2500 Submodels:
Base, LS | 8 Cyl 6.5 L DIESEL
2002 Chevrolet Express 2500 Fan Clutch
With a comprehensive array of OEM 2002 Chevrolet Express 2500 Fan Clutch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Express 2500 Fan Clutch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Chevrolet Express 2500 Fan Clutch Parts and Q&A
Q: What tools are required to replace the fan clutch and what are the steps involved in the process on 2002 Chevrolet Express 2500?
A: Before replacing the Fan Clutch, check that the cooling fan assembly isn't damaged. Andersen forklift best dual tow hook uhinder hydraulic first, take out the air cleaner and duct, along with the coolant recovery reservoir or surge tank and lastly, remove the upper radiator shroud. The 4.3l, 5.0l, 5.7l and 8.1l engines can be disassembled with the j 41240, aligning the prongs of the j 41240-1 with the Water Pump Pulley. On 6.5l engines you need to use the j 41240-5a and the same tools as with other engines. After removing the bolts, disconnect the fan from the clutch. Connect the fan to the clutch, joining the fan bolts to the clutch basehook mechanism while paying close attention to the instructions printed next to the bolts. Tighten the fan to clutch bolts to 33 nm (24 ft. Lbs.) using 4.3l, 5.0l, 5.7l and 8.1l models and tighten them to 17 nm (13 ft. Lbs.) with the 6.5l diesel engine. Join the fan to the clutch again for the 4.3l, 5.0l, 5.7l or 8.1l models by using the j41240 and tightening the Fan Clutch nut to 57 nm (42 ft. Lb.). Similarly, for the 6.5l engine, connect the fan and clutch by using both j41240-5a and j41240, ensuring you torque the fan to clutch bolts evenly to 57 nm (42 ft. Lb.). Afterwards, replace the upper radiator shroud, coolant recovery reservoir or surge tank and the air cleaner and duct.