OEM 2002 Chevrolet Prizm A/C Hose

2002 Chevrolet Prizm Parts Questions & Experts Answers

• Q: How to Replace an A/C Hose in the Compressor Hose Assembly on 2002 Chevrolet Prizm?

  A: Repair work on compressor hose assembly begins with extracting and conservation of refrigerant gases first. Separate the electrical connection of the refrigerant pressure switch after which use an appropriate fitting to cap the condenser's open fittings and prevent system entry of contaminants. You must first rotate the plate counterclockwise before taking out the compressor discharge hose from the condenser and eliminating both bolt pieces between the compressor hose assembly and the compressor. The compressor suction line must be removed from the accumulator followed by extracting the compressor hose assembly out of the vehicle. New o-rings lubricated with 525 viscosity mineral oil need to be used to install the item while properly positioning the compressor hose assembly inside the vehicle. Secure the suction line onto the accumulator through proper torque of 47 n.m (35 lb ft). Install the compressor hose assembly on the compressor while fastening it with a bolt and tightening it to 47 n.m (35 lb ft). Use bolt to clamp the plate above the condenser before sliding clockwise then fasten it with 47 n.m (35 lb ft). Then follow by reconnecting the refrigerant pressure switch connector before carrying out evacuation and recharge of the refrigerant system. Complete the process by activating the a/c system while inspecting for refrigerant leakages.