How to replace the Dipstick Tube and oil level indicator on 2002 Chevrolet Prizm?

Start by disconnecting both the oil level indicator from its guide tube while unclipping the crankshaft position sensor electrical connector from that tube. First detach the bolts then separately take out the guide tube and its guide tube seal from the cylinder block. During installation apply engine oil on the new guide tube seal before mounting it onto the cylinder block with one bolt and tighten it to 14 Nm (10 ft. lbs.). Install the oil level indicator onto the guide tube after reattaching the crankshaft position sensor electrical connector to its tube.

OEM 2002 Chevrolet Prizm Dipstick Tube

Oil Dipstick Tube

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dipstick Tube found

View related parts
2002 Chevrolet Prizm Tube
Part Number: 94859823
Product Specifications
- Other Name: Oil Dipstick Tube; Tube, Engine Oil Level
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.7 x 4.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94859823
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS

2002 Chevrolet Prizm Dipstick Tube

With a comprehensive array of OEM 2002 Chevrolet Prizm Dipstick Tube, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Prizm Dipstick Tube are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Prizm Parts Questions & Experts Answers

Q: How to replace the Dipstick Tube and oil level indicator on 2002 Chevrolet Prizm?
A: Start by disconnecting both the oil level indicator from its guide tube while unclipping the crankshaft position sensor electrical connector from that tube. First detach the bolts then separately take out the guide tube and its guide tube seal from the cylinder block. During installation apply engine oil on the new guide tube seal before mounting it onto the cylinder block with one bolt and tighten it to 14 Nm (10 ft. lbs.). Install the oil level indicator onto the guide tube after reattaching the crankshaft position sensor electrical connector to its tube.