ChevyParts
My Garage
My Account
Cart
OEM 2002 Chevrolet Tahoe Radiator Hose
Radiator Hose Tube- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Radiator Hoses found
2002 Chevrolet Tahoe Upper Hose Part Number: 15179498
$81.92 MSRP: $121.92You Save: $40.00 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hose, Radiator Inlet; Multi Purpose Hose; Radiator Hose; Cooling Hose; Hose, Radiator Inlet (Upper)
- Position: Upper
- Replaces: 15076028, 15045504, 15041305, 15033546
- Item Weight: 2.20 Pounds
- Item Dimensions: 31.2 x 8.2 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15179498
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2002 Chevrolet Tahoe Lower Hose Part Number: 22827735
$35.87 MSRP: $53.38You Save: $17.51 (33%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Hose, Radiator Outlet (Lower); Multi Purpose Hose; Radiator Hose; Cooling Hose
- Position: Lower
- Replaces: 19130015, 15037656, 15769077, 15792826
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.9 x 4.3 x 15.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22827735
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2002 Chevrolet Tahoe Radiator Hose
With a comprehensive array of OEM 2002 Chevrolet Tahoe Radiator Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Tahoe Radiator Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Chevrolet Tahoe Radiator Hose Parts and Q&A
- Q: How to Replace a Radiator Hose for Inlet on 2002 Chevrolet Tahoe?A: The first step before hose replacement requires draining the cooling system fluid. Detach the clamps securing the air cleaner outlet duct both at the Throttle Body and maf/iat sensor and then take out the duct. The engine sight shield should be removed if necessary. First detach the radiator vent inlet hose from its clips securing it to the radiator before moving the inlet hose clamp to the radiator and removing the hose from the radiator's port. Before continuing move the inlet hose clamp off the Fan Shroud and the inlet hose from the water outlet while removing the inlet hose clip from the Fan Shroud. The installation process begins with attaching the inlet hose to the water outlet while repositioning its clamp. First secure the inlet hose clip to the Fan Shroud while you attach the inlet hose to the radiator and finally tighten the inlet hose clamp. Secure the radiator vent inlet hose to radiator inlet hose clips before adding an engine sight shield if necessary. Install the air cleaner outlet duct after confirming the duct's Throttle Body end arrow matches the Throttle Body attaching stud. Finish the installation by tightening all air cleaner outlet duct clamps at both the Throttle Body and maf/iat sensor then tighten the screws to 7 nm (62 inch lbs.) and perform cooling system water fill operations.
Related 2002 Chevrolet Tahoe Parts
2002 Chevrolet Tahoe Water Pump
2002 Chevrolet Tahoe Coolant Reservoir
2002 Chevrolet Tahoe A/C Condenser Fan
2002 Chevrolet Tahoe Coolant Pipe
2002 Chevrolet Tahoe Coolant Reservoir Cap
2002 Chevrolet Tahoe Cooling Fan Clutch
2002 Chevrolet Tahoe Crossmember Bushing
2002 Chevrolet Tahoe Fan Blade
2002 Chevrolet Tahoe Fan Shroud
2002 Chevrolet Tahoe Radiator Cap
2002 Chevrolet Tahoe Radiator fan
2002 Chevrolet Tahoe Water Pump Gasket