How to properly burnish new brake discs and brake pads after replacement on 2002 Chevrolet Tracker?

If you have replaced brake pads, discs, or refinished discs, use a stretch of road with little traffic to start. Bring the vehicle up to 48 km/h (30 mph), not locking the brakes, and then slowly apply enough pressure to bring it to a stop without making the brakes overheat. When you have stopped, open up the throttle a little and let the brakes cool down again. Do this stopping and accelerating sequence around 20 times so the pads and discs can be properly burnished. Test the brakes after brake service only at safe speeds and within the law to keep your vehicle under control, because flouting these precautions may cause serious accidents and harm.

OEM 2002 Chevrolet Tracker Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Pad found

View related parts
2002 Chevrolet Tracker Brake Pads
Part Number: 91174817
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit, Brake
- Position: Front
- Item Weight: 2.90 Pounds
- Item Dimensions: 5.6 x 4.7 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91174817
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2002 Chevrolet Tracker Brake Pad

With a comprehensive array of OEM 2002 Chevrolet Tracker Brake Pad, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Tracker Brake Pad are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Tracker Brake Pad Parts Questions & Experts Answers

Q: How to properly burnish new brake discs and brake pads after replacement on 2002 Chevrolet Tracker?
A: If you have replaced brake pads, discs, or refinished discs, use a stretch of road with little traffic to start. Bring the vehicle up to 48 km/h (30 mph), not locking the brakes, and then slowly apply enough pressure to bring it to a stop without making the brakes overheat. When you have stopped, open up the throttle a little and let the brakes cool down again. Do this stopping and accelerating sequence around 20 times so the pads and discs can be properly burnished. Test the brakes after brake service only at safe speeds and within the law to keep your vehicle under control, because flouting these precautions may cause serious accidents and harm.

Related 2002 Chevrolet Tracker Parts

Alternate Year Models

2001 Chevrolet Tracker Brake Pad 2003 Chevrolet Tracker Brake Pad