ChevyParts
My Garage
My Account
Cart
OEM 2002 Chevrolet Tracker Camshaft
Cam- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Camshafts found
Product Specifications- Other Name: Shaft, Engine
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 3.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91174419
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Camshaft, Engine
- Item Weight: 6.40 Pounds
- Item Dimensions: 25.9 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177427
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Camshaft, Engine
- Item Weight: 2.50 Pounds
- Item Dimensions: 20.3 x 2.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177426
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Camshaft, Engine
- Item Weight: 3.80 Pounds
- Item Dimensions: 19.4 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Camshaft, Engine
- Item Weight: 3.80 Pounds
- Item Dimensions: 19.8 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177423
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Camshaft, Engine
- Item Weight: 4.50 Pounds
- Item Dimensions: 14.9 x 6.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177422
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Camshaft, Engine
- Item Weight: 4.50 Pounds
- Item Dimensions: 15.1 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2002 Chevrolet Tracker Camshaft
With a comprehensive array of OEM 2002 Chevrolet Tracker Camshaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Tracker Camshaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Chevrolet Tracker Parts Questions & Experts Answers
- Q: How to replace the camshaft on 2002 Chevrolet Tracker?A: To replace the Camshaft, one should first disconnect the negative Battery Cable, then remove the Crankshaft Pulley and Timing Belt from the engine as well as the valve rocker arm cover. Thereafter use an appropriate tool to hold the Camshaft Timing Belt pulley so that one may remove the Camshaft Timing Belt pulley bolt and pulley itself. Then remove the Timing Belt inner cover , the Camshaft sensor , and ground wire from the Camshaft sensor housing , and the wiring harness . Put a shop rag under Camshaft housing to prevent oil dropping while taking out the three Camshaft sensor bolts and then the housing from the Cylinder Head. Loosen all valve adjusting screw lock nuts and turn the adjusting screws back so that the rocker arms they are connected to can move freely. Finally, extracts the cam shaft from the valve head as a whole and the cam shaft oil seal. For the installation, coat the cams, journals and oil seal with clean engine oil and use the Camshaft to install it in the Cylinder Head. Tighten the housing bolts in the sequence mentioned above using the engine oil applied to them, tighten them to 10 nm (89 inch lbs.). Mount the Camshaft oil seal so that it is flush with the surface of the housing, then reinstall the Timing Belt inner cover. While installing the Camshaft timing sprocket see that the pin on the Camshaft goes into the slot marked "e" on the sprocket and fasten it using the Camshaft timing sprocket bolt tightened to 60 nm (44 ft. Lbs). Mount the Camshaft sensor housing onto the engine block work and tighten the bolts to 10 nm (89 inch lbs.), add the Camshaft sensor and ground wire, tighten the sensor bolt to 10 nm (89 inch lbs.). The valve rocker arm cover must also be temporarily installed, Timing Belt then removed and the Timing Belt should be adjusted afterwards. Replace the valve rocker arm cover again. Finally, attach Crankshaft Pulley and reconnect the negative Battery Cable, tightening it at 15 nm(11 ft. Lbs).
Related 2002 Chevrolet Tracker Parts
2002 Chevrolet Tracker Harmonic Balancer
2002 Chevrolet Tracker Cam Gear
2002 Chevrolet Tracker Crankshaft Gear
2002 Chevrolet Tracker Crankshaft Seal
2002 Chevrolet Tracker Crankshaft Thrust Washer Set
2002 Chevrolet Tracker Cylinder Head
2002 Chevrolet Tracker Engine Mount Bracket
2002 Chevrolet Tracker Intake Valve
2002 Chevrolet Tracker Oil Pump
2002 Chevrolet Tracker Oil Pump Rotor Set
2002 Chevrolet Tracker Rocker Shaft Spring Kit
2002 Chevrolet Tracker Timing Chain Tensioner