How to Replace Coil Springs on a Front Wheel Drive Without an Axle on 2002 Chevrolet Venture?

Before proceed to the removal of the coil spring's, lift the vehicle and enable it to be hold from the ground level through the lifting equipment. These include: removing the wheel and tire assemblies, the Brake Calipers, parking brake cable mounting bracket, and brake caliper mounting bracket. Unplug the abs electric connector and take off its mounting bracket. Use a utility jack to hold the lower Control Arm, then take the stabilizer link off the lower Control Arm. With the j 41820 Ball Joint/stud separator (J 41820) disengage the Ball Joint from the knuckle and let the lower Control Arm down using the utility jack and relieve the coil spring tension to remove the coil spring. For installation, install the new coil spring and lift the lower Control Arm with utility jack to load the suspension. Replace the j 41820 (J 41820) in to the Ball Joint at the knuckle, the stabilizer link on the lower Control Arm, and support the lower Control Arm again with the utility jack. Reinstall abs electrical connector mounting bracket, connect abs electrical connector, then install the brake caliper mounting bracket, parking brake cable mounting bracket, brake calipers. Lastly, reinstate the wheel and tire assemblies as well as raise the vehicle.

OEM 2002 Chevrolet Venture Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Coil Springs found

View related parts
2002 Chevrolet Venture Coil Spring, Rear
Part Number: 22132425
$59.59 MSRP: $144.50
You Save: $84.91 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring, Rear
- Position: Rear
- Item Weight: 6.00 Pounds
- Item Dimensions: 7.4 x 6.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22132425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Coil Spring, Front
Part Number: 22133043
$5.22 MSRP: $124.32
You Save: $119.10 (96%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.4 x 7.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22133043
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Coil Spring, Front
Part Number: 22133038
$74.40 MSRP: $104.15
You Save: $29.75 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Front; Coil Springs; Spring
- Position: Front
- Replaces: 22133036
- Item Weight: 7.20 Pounds
- Item Dimensions: 14.8 x 7.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22133038
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Coil Spring, Rear
Part Number: 10306378
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring; Spring, Rear
- Position: Rear
- Item Weight: 4.40 Pounds
- Item Dimensions: 12.0 x 4.7 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10306378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Coil Spring, Rear
Part Number: 22132417
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring; Spring, Rear
- Position: Rear
- Replaces: 22132416, 22132415
- Item Weight: 5.50 Pounds
- Item Dimensions: 7.2 x 6.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22132417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2002 Chevrolet Venture Coil Springs

With a comprehensive array of OEM 2002 Chevrolet Venture Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Venture Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Venture Coil Springs Parts Questions & Experts Answers

Q: How to Replace Coil Springs on a Front Wheel Drive Without an Axle on 2002 Chevrolet Venture?
A: Before proceed to the removal of the coil spring's, lift the vehicle and enable it to be hold from the ground level through the lifting equipment. These include: removing the wheel and tire assemblies, the Brake Calipers, parking brake cable mounting bracket, and brake caliper mounting bracket. Unplug the abs electric connector and take off its mounting bracket. Use a utility jack to hold the lower Control Arm, then take the stabilizer link off the lower Control Arm. With the j 41820 Ball Joint/stud separator (J 41820) disengage the Ball Joint from the knuckle and let the lower Control Arm down using the utility jack and relieve the coil spring tension to remove the coil spring. For installation, install the new coil spring and lift the lower Control Arm with utility jack to load the suspension. Replace the j 41820 (J 41820) in to the Ball Joint at the knuckle, the stabilizer link on the lower Control Arm, and support the lower Control Arm again with the utility jack. Reinstall abs electrical connector mounting bracket, connect abs electrical connector, then install the brake caliper mounting bracket, parking brake cable mounting bracket, brake calipers. Lastly, reinstate the wheel and tire assemblies as well as raise the vehicle.