OEM 2002 GMC Envoy Bumper

2002 GMC Envoy Bumper Parts Questions & Experts Answers

• Q: How to replace the front bumper fascia on 2002 GMC Envoy?

  A: The replacement process for chevrolet and gmc front Bumper fascia requires removing the grille before removing the 2 bolts (Wrench) securing the top of the fascia to the headlamp panel assembly followed by using a push pin tool to release the push-pin at the fascia top. Support the lifted vehicle while you remove the 3 push-pins which secure the fascia to its two support rods through the use of a push pin tool. The next operation requires fog lamp and cornering lamp removal from the fascia followed by air deflector detachment. Gently pull the fascia from the wheelhouse opening by releasing both body side attachment tabs while removing the 4 push-pins (Push Pin Tool) at the bottom of the fascia that attach it to the headlamp panel assembly. To install the new fascia position it on the vehicle body while making sure its body side attachment tabs are fully seated before you install the 4 push-pins (Push Pin Tool) at the bottom of the fascia to the headlamp panel assembly. The installation includes first attaching the 2 fascia support rods with 3 push-pins (Push Pin Tool). After that, attach the air deflector and cornering lamps and fog lamps to the assembly. Insert and tighten two bolts with a wrench to connect the headlamp panel assembly with the top fascia at 10 n.m (89 lb in). Reinstall the grille after placing the push-pin (Push Pin Tool) which connects the center of the top fascia part to the headlamp panel assembly.