Make sure this part fits

GM 88937036
Bumper Cover, Front

2002-2009 GM

Customer Questions & Expert Answers (7)
GM 88937036 Bumper Cover, Front
  • Part Description
    Fascia Assembly, Front Bumper
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$215.14 MSRP: $305.23
You Save: $90.09 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88937036
    Part DescriptionFascia Assembly, Front Bumper
    Other NamesFascia, Front And Rear Bumper/Fascia Face
    Item Dimensions81.6 x 22.6 x 19.8 inches
    Item Weight10.00 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU88937036
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2009 GMC EnvoySLE, SLT6 Cyl 4.2 L GAS
    2002-2006 GMC Envoy XLSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88937036 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88937036 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front bumper fascia on GMC Envoy? Posted by Customer
    A:
    The procedure to replace envoy and envoy xuv front Bumper fascia starts with grille removal before unfastening the top fascia to headlamp housing panel bolts and push-pin. Start by supporting the vehicle to raise it up. Then remove the 3 push-pins which connect the fascia to both fascia support rods and also remove the fog lamps. Afterward you should detach the cornering lamps. The next step requires you to remove the fascia air deflector and the 4 push-pins located at the fascia base where it attaches to the headlamp housing panel. The attachment tabs on the body side should be released while pulling the fascia forward to complete removal. Position the fascia on the vehicle with complete seating of body side attachment tabs. Then attach the headlamp housing panel using 4 push-pins at the bottom before installing 3 additional push-pins to connect the fascia support rods. After reattaching the air deflector, cornering lamps and fog lamps users should lower the vehicle. Secure the top of the fascia to the headlamp housing panel using 2 bolts at 10 n.m (89 lb in) torque setting before clipping the push-pin to the center area and lastly reinstall the grille.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the grille for the 2002 GMC Envoy? Posted by Customer
    A:
    Take out the 2 bolts (Wrench) securing the top of the fascia to the headlamp panel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Bumper
    Q:
    What is the next step after removing the lower fascia push-pins and screws for the 2007 GMC Envoy? Posted by Customer
    A:
    Remove the upper retaining bolts from the back of the fascia and take the fascia off the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Bumper
    Q:
    What should be installed after positioning the fascia for the 2006 GMC Envoy? Posted by Customer
    A:
    Install the 4 push-pins at the bottom of the fascia to the headlamp housing panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Bumper
    Q:
    What should be done after removing the backup lamp socket assemblies for the 2009 GMC Envoy? Posted by Customer
    A:
    Take out the lower fascia push-pins.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Bumper
    Q:
    What is the next step after removing the lower fascia push-pins and screws for the 2003 GMC Envoy? Posted by Customer
    A:
    Remove the upper retaining bolts from the back of the fascia and take the fascia off the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Bumper
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88937036, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88937036 Bumper Cover, Front. It is sometimes referred to as GM Bumper. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88937036 Bumper Cover, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed GMC parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery