Other Name: Mount; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount; Side Mount; Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
Item Weight: 2.60 Pounds
Item Dimensions: 6.9 x 7.1 x 3.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15708673
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 GMC Safari Submodels:
Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
2002 GMC Safari Engine Mount
With a comprehensive array of OEM 2002 GMC Safari Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 GMC Safari Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 GMC Safari Parts Questions & Experts Answers
Q: How to replace the left engine mount on 2002 GMC Safari?
A: The replacement process of left Engine Mount starts by disconnecting the battery negative cable and physically raising the vehicle. First unscrew the oil filter adapter followed by extracting the through-bolt and nut tightening it to the Engine Mount of the side being replaced. A jack placed on the square tab at the engine block rear should lift the engine block until the Engine Mount can be removed. Proceed by taking out the bolts which anchor the Engine Mount bracket to the engine before reaching the upper two bolts for the right Engine Mount bracket by accessing them through the fender wheelhouse. Starting with an awd vehicle requires removing bolts that join the Engine Mount to the frame structure before you can remove the mount itself. The right Engine Mount of a rwd vehicle needs its bolts and nuts removed which secures it to the frame bracket. You should detach the Engine Mount frame bracket from the left side of the frame only when needed. Begin awd frame installation by mounting the Engine Mount to its location followed by bolt tightening at 59 nm (44 ft. Lbs.). First install the left side bolts then nuts together with the Engine Mount frame bracket for rwd vehicles while tightening the frame bracket bolts to 47 nm (35 ft. Lbs.) and the nuts to 42 nm (31 ft. Lbs.). For the frame bracket installation of the left side Engine Mount you should first secure the mount to the frame bolts at 47 nm (35 ft. Lbs.) and then tighten the frame bracket nuts to 42 nm (31 ft. Lbs.). Once positioned on the Engine Mount bracket users need to tighten its bolts to 64 nm (47 ft. Lbs.). Lower the engine after which you need to install the through-bolt inside the Engine Mount along with its mounting nut and secure these components to 68 nm of torque (50 ft. Lbs.). Complete the procedure by reinstalling the oil filter adapter then lower the vehicle and reconnect the battery negative cable.