How to replace the negative battery cable on 2003 Buick LeSabre?

Remove the battery negative cable and body harness from it first, then take the cable out of the Floor Pan and take it away from the car. During installation, put the body end of the battery negative cable on the Floor Pan, installing the eyelet with the flat side facing down and the crimped side facing up, then tighten the bolt to 36 n.m (27 lb ft). Then, fasten the body harness connector to the body harness, and after that, attach the battery negative cable. Be sure to select a replacement cable that is the same type, diameter, and length as the old one, and put the new cable in place just like the old one.

OEM 2003 Buick LeSabre Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Battery Cables found

View related parts
2003 Buick LeSabre Battery Cable Part Number: 88986780
Product Specifications
- Other Name: Cable, Battery (Positive); Battery Cables; Starter Cable; Positive Cable; Cable, Battery(Positive)
- Item Weight: 2.40 Pounds
- Item Dimensions: 11.3 x 9.7 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88986780
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2003 Buick LeSabre Battery Cable Part Number: 15371977
Product Specifications
- Other Name: Cable, Battery (Positive); Battery Cables; Starter Cable; Positive Cable; Cable, Battery(Positive)
- Replaces: 15321266
- Item Weight: 1.80 Pounds
- Item Dimensions: 11.8 x 9.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15371977
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2003 Buick LeSabre Battery Cable Part Number: 15321235
Product Specifications
- Other Name: Cable, Battery Ground (Negative); Battery Cables; Ground Strap; Ground Cable; Cable, Battery Ground(Negative)
- Item Weight: 1.10 Pounds
- Item Dimensions: 12.6 x 3.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15321235
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2003 Buick LeSabre Battery Cable Part Number: 88953169
Product Specifications
- Other Name: Cable; Battery Cables; Ground Strap; Negative Cable; Cable, Battery Ground(Negative)
- Item Weight: 1.10 Pounds
- Item Dimensions: 12.8 x 3.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88953169
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2003 Buick LeSabre Battery Cable

With a comprehensive array of OEM 2003 Buick LeSabre Battery Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick LeSabre Battery Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick LeSabre Battery Cable Parts and Q&A

Q: How to replace the negative battery cable on 2003 Buick LeSabre?
A: Remove the battery negative cable and body harness from it first, then take the cable out of the Floor Pan and take it away from the car. During installation, put the body end of the battery negative cable on the Floor Pan, installing the eyelet with the flat side facing down and the crimped side facing up, then tighten the bolt to 36 n.m (27 lb ft). Then, fasten the body harness connector to the body harness, and after that, attach the battery negative cable. Be sure to select a replacement cable that is the same type, diameter, and length as the old one, and put the new cable in place just like the old one.