How to service the front wheel bearing on 2003 Cadillac CTS?

Before working on the front Wheel Bearing you need to lift and support the vehicle. Take off the tire wheel assembly and slide out the brake rotor. Detach the abs electrical connection and the splash shield connection. Remove the Wheel Bearing/hub bolts first then bring out the Wheel Bearing/hub unit. Install the Wheel Bearing/hub by putting it into place and tightening all Wheel Bearing/hub bolts to 135 nm (100 ft. Lbs.). Connect the abs electrical cables first and put back the tread wheel on the brake rotor before putting down the vehicle.

OEM 2003 Cadillac CTS Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Bearing found

View related parts
2003 Cadillac CTS Rear Speed Sensor, Front
Part Number: 19370295
$155.46 MSRP: $278.86
You Save: $123.40 (45%)
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Hub & Bearing; Front Speed Sensor; Hub, Front Wheel; Hub, Rear Wheel
- Position: Front
- Replaces: 12413071, 25693148, 19259810
- Condition: New
- SKU: 19370295
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS

2003 Cadillac CTS Wheel Bearing

With a comprehensive array of OEM 2003 Cadillac CTS Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac CTS Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Cadillac CTS Parts Questions & Experts Answers

Q: How to service the front wheel bearing on 2003 Cadillac CTS?
A: Before working on the front Wheel Bearing you need to lift and support the vehicle. Take off the tire wheel assembly and slide out the brake rotor. Detach the abs electrical connection and the splash shield connection. Remove the Wheel Bearing/hub bolts first then bring out the Wheel Bearing/hub unit. Install the Wheel Bearing/hub by putting it into place and tightening all Wheel Bearing/hub bolts to 135 nm (100 ft. Lbs.). Connect the abs electrical cables first and put back the tread wheel on the brake rotor before putting down the vehicle.